There are 2 ways to change Cell2Jack's setting ( such as Mic/speaker volume, stronger ringing voltage, off-hook power, echo cancellation, media audio, DTMF Tone command, hook detection speed.....)
Method 1 (Preferred): Using Windows 10 PC. Click here for instruction.
OR using Mac Click here for instruction
Method 2: If you don't have Windows 10 PC or Mac, you can enter commands by pressing the home phone keypad while off hook to change the setting (you should hear an acknowledge tone after enter the keys):
below is the command key functions list.
#*# or 0000 start pairing procedure
* or 1111 start voice assistant (Siri, Google assistance)
89# Ring back test
14# Enable ROBOT call screening. Caller require to press "000" to connect call.
15# Disable ROBOT call screening (default)
20# Regular ringing strength (default)
21# Strong Ringing Strength (turn this on if your phone not ring due to loading).
24# - 28# Speaker volume. Default is 26#. 24# is min, 28# is max
30# - 33# Hook detection speed. 31# is default. 30# is min, 33# is max
If the phone line has too much loading, need increase this value to ring or avoid call drop during conversation.
35# Enable DTMF tone command.
If you need to use phone keypad to issue command after the call connect.
35# Disable DTMF tone command.
37# to 39# set the DTMF tone command threshold. 37# is min, 39# is max
60# Disable your Bluetooth's media audio option.
61# Enable your Bluetooth's media audio option.
Will route all sound including music, notification tone to your home phone.
70# -74# : Off hook voltage: Power provides to your phone. Default is 72#, 70# is min, 74# is max
82#83# Factory reset
80# Disable Echo Cancellation
81# Enable Echo Cancellation. Default is enable.
90#-94# MIC volume. Default is 92#, 90# is min, 94# is max
99# Reboot Cell2Jack
OR using Mac Click here for instruction
Method 2: If you don't have Windows 10 PC or Mac, you can enter commands by pressing the home phone keypad while off hook to change the setting (you should hear an acknowledge tone after enter the keys):
below is the command key functions list.
#*# or 0000 start pairing procedure
* or 1111 start voice assistant (Siri, Google assistance)
89# Ring back test
14# Enable ROBOT call screening. Caller require to press "000" to connect call.
15# Disable ROBOT call screening (default)
20# Regular ringing strength (default)
21# Strong Ringing Strength (turn this on if your phone not ring due to loading).
24# - 28# Speaker volume. Default is 26#. 24# is min, 28# is max
30# - 33# Hook detection speed. 31# is default. 30# is min, 33# is max
If the phone line has too much loading, need increase this value to ring or avoid call drop during conversation.
35# Enable DTMF tone command.
If you need to use phone keypad to issue command after the call connect.
35# Disable DTMF tone command.
37# to 39# set the DTMF tone command threshold. 37# is min, 39# is max
60# Disable your Bluetooth's media audio option.
61# Enable your Bluetooth's media audio option.
Will route all sound including music, notification tone to your home phone.
70# -74# : Off hook voltage: Power provides to your phone. Default is 72#, 70# is min, 74# is max
82#83# Factory reset
80# Disable Echo Cancellation
81# Enable Echo Cancellation. Default is enable.
90#-94# MIC volume. Default is 92#, 90# is min, 94# is max
99# Reboot Cell2Jack
Note:
Since we constantly update our firmware to add new features and improve performance,
we strongly recommend you to update the firmware.
Click this line to update firmware
Since we constantly update our firmware to add new features and improve performance,
we strongly recommend you to update the firmware.
Click this line to update firmware